ЗАО ИТОМАК

Почтовый адрес: 630128, г. Новосибирск-128, а/я 271,
Офис и лаборатория: 630060, г. Новосибирск, ул. Зеленая горка, 1/1
Телефон: 8 (383) 325-02-81, 325-02-84


Disintegrator with a high-pressure system "ITOMAK-DVD 0.1"


ITOMAK-DVD 0.1


SPECIFICATIONS

Parameter name

Value

Power of main engine, kW

0,37

Auxiliary engine power, kW

0,25

Power high pressure pump , KW 5,5

Maximum productivity for the starting material , m3 / h,

0,1

Disintegrator drum speed revolutions / min

54,0

Working angle disintegrator, max

20º

The length of the sowing part of the disintegrator, mm

500

The diameter of the holes in the sowing part of the disintegrator, mm

2,0

Maximum size of the starting material, mm

 300
The water pressure in the system, bar
200

Weight, kg , not more

180

Overall dimensions, mm not more


Length

910

Width

720

Height

1150


ORDER

SHORT DESCRIPTION

Disintegrator intended for washing, mechanical disintegration and classification in an aqueous an alluvial sands or ores for subsequent processing on concentrating apparatus.

The operating principle is the Butare disintegration sand, ores and grains wash the valuable minerals from the clay gouges. Disintegration in Butare is done by loosening the raw material in the water with your fingers or rotating plates, fixed in a certain order on the inner surface of the hollow part of Butare. The presence in the gravel material enhances the effect of disintegration due to impact and abrasive effects of sliding and falling stones.

The processed material through the intermediate receiving hopper, is fed into the loading window rotating scrubber-butare. At the same time in Butare supplied with water, which can act like the source material, or separately through pipe-sprinkler mounted within Butare.

The principle of operation of the cage mill is a jet of water erosion of sands high pressure washing ores and grains of minerals from the clay gouges. The jet scouring the water is directed through the main hole, rotary atomizers. Additionally to install two slotted flushing nozzle mounted intended for washing the holes of the perforated drum. The drum rotates continuously.
A portion of the processed material is fed into the disintegrator perforated drum through charging window, then the window is closed lid. Further, the housing is translated into the operating position through the main nozzle and is supplied with water under pressure up to 200 bar.
In the deaf part of the scrubber-butare there is a process of disintegration and washing the raw material. The washed material class size smaller than the size of the perforation passes through the holes in the drum shell to drain, and discharged through the drain pipe. Material size class over the perforation size, upon completion of the disintegration cycle tipping body unloads.


  ITOMAK-DVD 0.1 - the Draw

Disintegrator with a pump