Sampling device PG-A-25 |
Parameter name |
Value |
|---|---|
| Productivity on the solid precipitate kg / h, min |
2000 |
| Productivity on pulp m3/h |
6.0 |
|
Time intervals spending in the "waste" position |
1 sec .. 99 min |
|
Sampling time |
7.. 10 sec |
|
AC voltage supply, V |
220 |
|
The diameter of the receiving pipe, mm |
76 |
|
The diameter of the outlet pipe, mm |
76 |
|
The diameter of sample discharge pipe, mm |
48 |
|
Weight with control cabinet, kg, not more |
35 |
|
Overall dimensions, mm, no more: |
|
|
Width |
310 |
|
Height |
650 |
|
Depth |
290 |
SHORT DESCRIPTION
On tank mounted gear motor, inlet branch pipe, outlet branch pipe, samples outlet branch pipe and bearing assembly. Inside the tank and on a bearing assembly is installed a rotary knife with gap for the samples reception. From its side probe tank is closed with cover.
The starting material in the form of slurry flows into the suction intake passes through the tank and then poured through the outlet. to an electronic timer command gearmotor translates rotary knife from one extreme to the other, then back again. When crossing the slurry flow from the output nozzle turncutter selects a certain amount of material, and it drains through the drain tube in the sample container outstretched.
ORDER